Regrouping

 I have been hanging the panels in different arrangements every few days. The four panels here seem to make a good group since I added a light cream-tinted glaze over each one. The pouring medium dries to a high gloss, so I used matte varnish over the last pours. The stone-like affect is beginning to grow on me! My mentor has advised me to be open to what happens in the studio, especially if it is not what I am expecting nor what I intended. I have decided to leave these panels as they are. The white cut-outs are integrated more with the grounds and most of the edges are somewhat blurred with the glaze pooling along the edges of the cut paper.

My blog took a back seat lately as I worked on my first thesis outline. It has been interesting to go back and look at all the research I have already done through the MFA program. My essays have helped me to identify the main issues in my work. I'm sure I will be revising the outline several times before I am finished with it, but at least I have something to begin with.

Hybrid Panel - Crocus 10" x 8" x 1½" Paper and acrylic on board.

Hybrid Panel - Spruce Twigs 12" x 10" x 1½" Paper, graphite and acrylic on board.

Hybrid Panel - Fiddleheads 10" x 8" x 1½" Paper and acrylic on board.

Hybrid Panel - Roots 8" x 10" x 1½" Paper and acrylic on board.

 The next panel began with a detailed pencil drawing which I intended to cut out from the start. I am working on a second panel (below) with a thin wood cut-out of the plant's silhouette. I have trimmed off the three stems that protrude from the left side of the piece as I find them distracting. I hesitate to do to much to it! The plan is to see what the two versions will look like together.

Hybrid Panel - Butternut Leaves 10" x 12" x 1½"  Paper, graphite and acrylic on board
I enjoyed the drawing, but is it compelling enough?

Birch Panel - Butternut Forms 10" x 12" x 1½" Birch plywood and board 
More interesting than the graphite traditional drawing

I find it difficult to evaluate my work right after I finish it as I am usually most enthusiastic about whatever it is I have just made. The graphite panel, Butternut Leaves, above has not reproduced well. Perhaps this is what it really looks like and I will agree with my photo of it by tomorrow! It seems to lack the vitality of the other panels. Tomorrow I will be sanding the edges very carefully of the Butternut Forms. The wood grain adds to the piece. I may just seal the wood with a clear coat and leave it alone after that.

The butternut tree is an endangered species in New Brunswick. Apparently it is illegal to cut one down or prune it without permission from the province. A very industrious squirrel has been planting the nuts from our neighbour's tree in our yard and we have several small butternut saplings growing in odd corners of the garden. I actually pulled a few up before realizing what they were. The same squirrel has given us an oak tree and several purple-leaved maples. I found a cache of chestnuts the other day, but none of them had sprouted yet!

Three earlier panels form a group.

After arranging the four "frosted" panels together, these three make a good group.